ResMed AirSense 10 AutoSet CPAP Machine
with HumidAir Heated Humidifier

ResMed AirSense 10

Product Overview

The AirSense 10 AutoSet CPAP Machine with HumidAir Heated Humidifier builds on the reliable and advanced features of the S9 line of machines by ResMed adding a built in HumidAir™ humidifier in a sleek design that is 23% lighter.

The ResMed AirSense 10 AutoSet CPAP Machine with HumidAir Heated Humidifier combines the proven technology of the AutoSet algorithm with the integrated comfort of the Optional ClimateLineAir Heated Tube. This is an auto titrating CPAP machine which adjusts the pressure on a breath by breath basis to deliver the minimal pressure needed to maintain the airway.

Features

•  AutoSet Algorithm
•  Built In HumidAir Humidifier
•  Optional ClimateLineAir Heated Tube
•  Expiratory Pressure Relief (EPR)
•  Auto Features
•  My Options Color LCD Display
•  Light Sensor
•  Advanced Data

AutoSet Algorithm

ResMed’s advanced algorithm is proven to provide effective therapy on a breath by breath basis accounting for flow limitations. Pressure is smoothly increased over the duration of the limitation and decreases again when the event clears. This is beneficial for active sleepers who experience a great number of events when changing position during sleep. AutoSet Response is also available to make pressure increases even more tolerable and gentle. The AirSense 10 AutoSet can be set to automatically adjust or to a single pressure mode if desired.

 

HumidAir Heated Humidifier and Optional ClimateLineAir Heated Tube

The Humidair humidifier is built into the AirSense 10 machine making for a smaller overall footprint on the bedside table. Humidity level is easily adjustable from the My Options screen and offers 9 setting levels. Select 1 through 8 with 1 being the lowest level of humidification, and 8 being the highest, or turn the humidifier off entirely.

Add the OPTIONAL ClimateLineAir Heated Tube to optimize humidification with Climate Control’s Auto function. The system considers the temperature of the room air to provide optimum humidification with minimal rainout condensation.

 

Expiratory Pressure Relief (EPR)

ResMed machines offer EPR making breathing with a CPAP device more natural by adjusting the amount of pressure delivered during exhalation and inhalation. EPR can be turned off, or set to 1, 2 or 3 with 1 being the smallest change between inhalation and exhalation and 3 being the largest change in pressures.

 

LCD Display with My Options

The AirSense 10 AutoSet has a colored LCD display and easy to read menus. Select the menu item on the screen by turning the easy grip dial. Selecting the My Options menu shows the current settings and lets the user modify settings including:

  • Ramp time – Ease into therapy with a period of lower pressure. Or select AutoRamp and the machine senses when sleep begins.
  • Humidity Level – Set humidity between 1 (lowest) & 8 (highest), or turn it off.
  • Mask Fit – Runs a seal integrity check showing green smiling face or red frowning face.
  • Pressure Relief – Eases the pressure when exhaling
  • SmartStart – Therapy automatically starts when it senses breathing
  • Mask Type – Set mask type being used: Nasal; Nasal Pillow; Full Face Mask
  • Run Warmup – Preheat the humidifier water before starting therapy
  • Response – Provides a more gentle transition during pressure increases

 

Light Sensor

An integrated light sensor reads the light in the room and adjusts the screen brightness automatically. When the lights in the room are turned off, the screen dims and then, after a few seconds, goes dark. No bright display screen to disturb sleep.

 

Advanced Data

The AirSense 10 AutoSet will display the following advanced therapy data on the machine display through the “More Info” option in the “Sleep Report” menu:

  • Usage Data
  • Events Per Hour
  • Average Usage
  • Leak Rate
  • AHI

This Product Includes…

  • Auto-Adjusting CPAP Machine
  • Built-In HumidAire Heated Humidifier
  • Standard Humidifier Chamber
  • SlimLine Tubing – 15mm Diameter
  • Power Supply and Cord
  • Travel Bag
  • 1- Standard Filter (Installed)
  • Filter Cover
  • SD Card – Inserted in Machine
  • Patient Manual
  • Hose Elbow

Product Specifications:

Weight – Machine with Water Chamber: 2.75 lbs (44 oz.)

Dimensions – Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H

Weight – Standard Chamber: .54 lb

Weight – Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs

Dimensions – Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H

Dimensions – Travel Bag: 13.24 in L x 10 in W x 5 in H

Weight – Travel Bag Alone: 1.18 lb

Weight – Machine with Humidifier; Power Supply and Cord; SlimLine Tube; Travel Bag: Approximately 5.1 lbs

Weight – Machine with Humidifier; Power Supply and Cord; OPTIONAL ClimateLineAir Tube; Travel Bag: Approximately 5.25 lbs

Sound Level: 26.6 dBA

Water Chamber Capacity: 380 mL

Weight – 90W Power Supply, Cord and Plug: 1.29 lb

Dimensions – 90W Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in

AC Input Range – 90W Power Supply: 100 – 240V, 50 – 60Hz, 1.0 – 1.5A, Class II

DC Output – 90 W Power Supply: 24V — 3.75A

Typical Power Consumption: 53W (57VA)

Peak Power Consumption: 104W (108VA)

Operating Pressure: 4 – 20 cm H2O (0.2 cm increments)

Length – SlimLine Tubing: 6 feet

Materials – SlimLine Tubing: Flexible Plastic

Materials – Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal

Materials – Standard Filter: Polyester non-woven fiber

Temperature Range – Optional ClimateLineAir™ Heated Tube: 60 – 80° F (16 – 30° C)

Operating Temperature: 41° F – 95° F (5° C – 35° C)

Storage and Transport Temperature: -4° F – 140° F (-20° C – 60° C)

Operating Humidity: 10% – 95% Relative Humidity, non-condensing

Storage and Transport Humidity: 5% – 95% relative Humidity, non-condensing

Operating Altitude: Sea Level – 8500 Feet (2,591 M); Air pressure range 1013 hPa – 738 hPa

Maximum Temperature – Heating Plate: 154° F (68° C)

Maximum Temperature – Cut Out: 165° F (74° C)

Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C)

IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22

Machine Warranty: 2 Years

Patient Weight: Greater than 66 lbs

 

Cleaning Instructions

The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask.

Required Settings: This machine does not have required settings.